2002 Honda CBR600F4iChain slack: 25–35 mmRear axle: 93 NmOil: 6 000 kmValves: 24 000 km
Honda CBR600F4i
2002 · GLOBAL Market
Reference data for routine maintenance procedures. Always verify against your service manual.
The 2002 Honda CBR600F4i (PC35) is a 599 cc liquid-cooled DOHC inline-four sport motorcycle with PGM-FI fuel injection, diamond-type frame, and chain final drive. Specs are from Honda global/export service data for the 2001–2003 F4i series (shared platform across markets; use a region-specific entry when values differ, e.g. US plugs or schedules).
| Front axle | 59 Nm |
| Front axle holder flange bolts | 22 Nm |
| Rear axle nut | 93 Nm |
| Front brake caliper mounting flange bolts | 30 Nm |
| Front brake caliper assembly bolts | 23 Nm |
| Rear brake caliper pin bolts | 27 Nm |
| Oil drain bolt | 29 Nm |
| Oil filter cartridge | 26 Nm |
| Spark plug | 12 Nm |
| Drive sprocket special bolt | 54 Nm |
| Final driven sprocket nuts | 64 Nm |
| Displacement | 599 cc (inline-4, DOHC, liquid-cooled) |
| Spark plug (NGK) | IMR9C-9H |
| Spark plug (DENSO) | VUH27D |
| Spark plug gap | 0.80–0.90 mm |
| Valve clearance (cold) | Intake: 0.20 ± 0.03 mm · Exhaust: 0.28 ± 0.03 mm |
| Idle speed | 1 300 ± 100 rpm |
| Battery | YTZ10S (12 V – 8.6 Ah) |
| Clutch lever free play | 10–20 mm |
| Throttle grip free play | 2–6 mm |
| Grade | SAE 10W-40 (API SF or SG; Pro Honda GN4/HP4 or equivalent) |
| Capacity (no filter) | 3.0 L |
| Capacity (with filter) | 3.3 L |
| Capacity (after disassembly) | 3.7 L |
| Drain bolt torque | 29 Nm |
| Oil filter cartridge torque | 26 Nm |
| Slack | 25–35 mm |
| Sprocket teeth | Front: 16 · Rear: 46 |
| Drive sprocket bolt torque | 54 Nm |
| Driven sprocket nut torque | 64 Nm |
| Rear axle nut torque | 93 Nm |
| Front | 120/70 ZR17 (58W) · 2.5 bar (250 kPa) |
| Rear | 180/55 ZR17 (73W) · 2.9 bar (290 kPa) |
| Min. tread depth (front) | 1.5 mm |
| Min. tread depth (rear) | 2.0 mm |
| Coolant | Ethylene glycol antifreeze with corrosion inhibitors, 50% with soft water (Pro Honda HP Coolant or equivalent) |
| Coolant capacity (radiator + engine) | 2.7 L |
| Coolant capacity (reserve tank) | 0.31 L |
| Brake fluid | DOT 4 |
| Capacity | 18.0 L |
| Engine oil change | 6 000 km |
| Engine oil filter | With oil service (see schedule) |
| Valve clearance check | 24 000 km |
| Spark plug inspection | 12 000 km |
| Spark plug replacement | 24 000 km |
| Air cleaner replacement | 18 000 km (more often if dusty) |
| Coolant replacement | 36 000 km or 2 years |
| Brake fluid replacement | 2 years |
| Drive chain clean/lube | Every 1 000 km |
Disclaimer
- • Data source: Honda CBR600F4i Service Manual 2001–2003 (ManualsLib 1215226) for capacities/torques/clearances; international Owner's Manual (ManualsLib 677490) for spark plugs and km schedule — global/export-series data, not a JP-only manual
- • Specifications may vary by VIN, market variant, and model year.
- • Always consult your owner's manual and service documentation.
- • Use this information at your own risk.